July 27, 2017
Model No : M3HP TRUE BORE
Description
M3HP three piece body ball valves are isolating valves designed for use on clean steam, condensate and other gases and liquids used in high purity and aseptic processes.
The valve is not designed as a control valve and should be used only as an isolating valve, fully open or fully closed.
The product was mainly designed for the
pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
MAIN FEATURES
True bore floating ball design
Completely made from solid bar stock material
Can be serviced without removal from pipeline
Bidirectional
Anti blow out proof stem
Tube weld with loose body flanges
(360º rotation after installation)
STANDARD SURFACE FINISH
Internal wetted parts: ≤ 0,5 micron Ra
External : ≤ 0,8 micron Ra
( 0,25 micron Ra and electro polished as option)
Ultrasonic cleaning
OPTIONS:
Antistatic device
Different sealing materials
ISO 5211 mounting
Degreased for oxygen use
USE: Clean steam, gases and liquids compatible
with the construction.
AVAILABLE MODELS: M3HP – Complete bar stock construction
SIZES: DN1/2” to DN 2”
CONNECTIONS:
According to ASME BPE
TC – Sanitary clamps
ETO – Extended tube orbital welding
TC / ETO – Combination
PACKAGING:
Assembling and packaging in a clean room
certified according to ISO 14644-1.
The product is end capped and vacuum
sealed with recyclable plastic film to avoid
contamination.
INSTALLATION:
See IMI, installation and maintenance
instructions.
Model No : GV32B
Description
GV32B bronze in line stop valves, screwed type for use on steam, water, oil or air applications.
MAIN
FEATURES : Rising stem PTFE renewable disk High quality PTFE packing
USE: Saturated steam, condensate, water,
oil, compressed air and other fluids compatible with the construction.
.
AVAILABLE MODELS: GV32B
SIZES : DN1/2” – 2”
CONNECTIONS: Female screwed ISO7/1Rp(BS21)
LIMITING CONDITIONS :
Body design conditions: PN32
198ºC at 14 bar 100ºC at 32 bar
Model No : VPA26S
Description
The VPA26S blowdown valve was specially designefor application on steam boilers removing thconcentrations of solids avoiding boiler damagesunstable water level control and other typicaproblems.
The valves are provided with a diaphragm actuatosuitable for compressed air motive fluid.
The opening signal is supplied by an automatiintermittent control unit or manually (optional).
Connections are flanged.
OPERATION
The valve can be operated manually or using pneumatic actuator. Valve aperture depends from thboiler manufacturer specification (example: once day during five seconds).
MAIN FEATURES
High quality hardened valve and seat.
Manual or automatic control.
Can be locked in the open position if supplied witthe manual operation lever.
OPTIONS:
Air filter regulator
Solenoid valve with cycling timMechanical limit switch
Water powered actuator
Stainless steel construction.
USE: Intermittent blowdown of steam
boilers.
AVAILABLE MODELS: VPA 26S
VALVE SIZES: DN20 to DN50
CONNECTIONS: Flanged EN 1092-1
ACTUATORS: PA-205; PA-280.
ACTUATOR CONN: 1/4” NPT-F
Model No : M3S1
Description
M3S1 three pieces ball valves are isolating valves
designed for use on steam, condensate and other gases
and liquids compatible with the construction.
The valve is not designed as a control valve and should
be used only as an isolating valve, fully open or fully
closed.
Connections are threaded or socket welded
MAIN FEATURES
Full bore floating ball design
Can be serviced without removal from pipeline
Bidirectional
Anti blow out proof stem
Antistatic device
OPTIONS: Different sealing materials
Fire safe design
USE: Steam, gases and liquids compatible with
the construction.
AVAILABLE
MODELS: M3S1 – Zinc plated carbon steel
RATING: PN100
SIZES: DN1/2” to DN 2”
CONNECTIONS:
BSP female threads ISO 7/1 Rp (BS21)
NPT to ANSI B1.20.1
SW – Socket weld to ANSI B16.11
BW – Butt weld to ANSI B16.25)
INSTALLATION:
See IMI, installation and maintenance instructions.
Model No : ADCAMAT POP-S
Description
The ADCAMAT POP (Pressure Operated Pump) fabricated carbon steel (stainless steel on request) is recommended in the transfer of high-temperature liquids such as condensate, oils and other liquids to a higher elevation or pressure.
The pump starts when there is something to pump and stops when there isn’t. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated by steam, compressed air or gas and can be used for lifting any kind of no corrosive liquids. Connections are flanged or female screwed (with screwed flanges).
Model No : ADCA-ST
Description
The ADCA-ST series steam to water shell and tube heat
exchangers are shorter and lighter than the alternative shell
and tube exchangers manufactured with smooth pipes. The
use of extruded low fin tubes, has the advantage that it can
improve the external surface and thermal performance.
MAIN FEATURES
Corrosion-resistant stainless steel low finned tube bundle
construction.
Straight tubes for easy cleaning.
Floating head at the end of the tube bundle, avoiding tube
stresses caused by thermal expansion and contraction.
OPTIONS : Vertical installation, see STV
catalogue.
USE : Steam, water, hot condensate
and other fluids compatible with
the construction.
AVAILABLE MODELS:
STH/S – Carbon steel shell
STH/SS – Complete st. steel
CONNECTIONS : Flanged or screwed, according to
EN 1092-1 or ANSI standards.
INSTALLATION: Floor, wall, hanging from the
ceiling.
Steam runs inside the tubes and
process water outside.
ORDER REQUIREMENTS: Steam pressure and temperature Inlet and outlet water temperature
Water mass flow or heat exchanged.
See inquiry sheet.
Model No : P 20P
Description
The ADCA P20P series direct acting, spring-loaded piston sensing, pressure reducing valves, are designed for use on compressed air and other gases or liquids compatible with the materials of construction .
They are suitable for low flow pressure reducing in instrumentation systems among others. Connections are female screwed.
Model No : SCK
Description
Being installed after the steam trap, the sight checker is a device to be used for visually checking the conditions and leakage of steam traps.
SCK sight checker functions as both sight glass and check valve.
Connections are female screwed.
USE: Condensate pipes downstream steam
traps.
AVAILABLE MODELS: SCK
SIZES: ½”, 3/4” and DN 1”
CONNECTIONS:
Female screwed ISO 7/1Rp(BS21).
INSTALLATION:
Horizontal or vertical (bottom to top)
installation.
See IMI, installation and maintenance
instructions.
CAUTION:
SCK should be fitted at least 1m from
the trap in order to protect the glass
from thermal pressure or shock.
PMO – Max. operating pressure 10 bar
TMO – Max. operating temperature 150 ºC
How to order: i.e. SCK DN ½” BSP.
Model No : AE16SS
Description
The AE16SS stainless steel air eliminator removes air from HVAC systems and is also suitable for non corrosive and/or dangerous liquids providing that their specific weight is not less than 0,75Kg/dm3.
This ball float type automatic air eliminator can be used in combination with other air elimination and separation systems or directly applied at high points in the piping. Connections are female screwed.
MAIN FEATURES
Corrosion-resistant.
Replaceable internal parts.
USE: Cold and hot water systems.
AVAILABLE MODELS:
AE16SSE (EPDM valve)
AE16SSV (VITON valve)
SIZES: DN 1/2” and ¾”.
CONNECTIONS:
Inlet ½” or ¾” vertical.
Outlet ½” vertical.
Female screwed ISO 7/1Rp(BS21)
INSTALLATION:
Vertical installation. It must be installed
absolutely vertically at the points in the
plant where the air tends to collect .The
drain should be piped to a safe position.
See IMI installation and maintenance
instructions.